sorry for the typo its scratch live not like
I also have both deck hook up with ethernet cable
and I have dicer hooked up as well
Nick

Hi nickythedj,

When you switch back from playing from USB, and press to connect to HID Mode, does it allow you to connect at all?

Does this happen when you are just using one CDJ and nothing else is connected (No iPad or LPD8)?

From playing in scratch live and switching to SD card or USB Stick , No it will not let me link CDJ 2000/LPD8 back to Serato.
LPD8 drops out as well.
After CDJ200/LPD8 will not respond I have bypass the powered USB port and hooked up direct from laptop to CDJ2000/ LPD8 pad the port on my Mac it will not respond I have to reboot and once I reboot CDJ2000/LPD8 work fine with Scratch live if I try to go to SD/Usb it happens all over again.

I'm going to replace powered USB hub and going to replace ethernet cable and try a different LPD8 pad and Try a Different Roland Uno midi to usb that I use for pionerr 800
I will let you know what happens.
Thank you
P.S I LOVE SERATO!!!!

Hi nickythedj,

Are you able to remove every other MIDI device from this situation and just have ONE CDJ connected using HID mode and your SL 3.

Try switching from USB stick to HID mode and back with ONE CDJ for a while, just to see if you can get it to happen. If not, then do the test with TWO CDJs.

For this test it would be easiest to remove anything else such as the LPD8, iPad or your Pioneer DJM 800.

Hi nickthedj,

before you switch back to HID mode, turn the CDJ off and on again. Then it can connect again.
Or, when you connect the player it won't connect until you connect the second player again to serato.

greetings

Cheers :)