'hey dj Dlbs,
When you play the cdj, do u see the wave moving on the software? Double check connections, including the RCA thats connected to the back of the cdj

You need to put the PGM knobs at the top of the mixer to D1 and D2.

Thanks for the responses-

The RCA cables are good, because I'm still getting a feed from them. I have them connected to channels 1 and 3.

I tried changing the PGM knobs to D1 and D2 and moving the RCA's to the proper spot, but I still only get the buzzing noise, and no music. I also made sure that the switch on the back is on the numbers and not "line". Any other suggestions? Thanks again for the help.

As Konix stated - Set the input knobs on the mixer to D1 and D2. Make sure to plug into inputs 1 and 3 on the back of the mixer. Switch the Phono Line Swtiches 1 and 3 to the LINE position.

Once this is set - put the decks in the program to ABS mode. Load a song - press Play on the CDJ and make sure you are playing track 1 on the control disk from the beginning.

This should do it.

Again, thanks for the help!.. I have everything set up exactly like that, but for some reason, the music is still not playing. It's even tracking in the circular motion, but no sound is being produced, and the tracking bar is red. Anything else you can think of?

Does your computer have i Processors? What do you have your buffer size in the Set-up under Hardware set to?

Are you using a USB hub or a splitter?