DJing Discussion
Crossfader has been broken with a smoke!!!
This area is for discussion about DJing in general. Please remember the community rules when posting and try to be polite and inclusive.
Crossfader has been broken with a smoke!!!
Armtone
8:03 PM - 18 July, 2009
Today, my crossfader from 57 has been broken with a smoke! Where i can buy new or what i need to do?
dj SHOK-1
4:46 PM - 19 July, 2009
i know the situation ...
Armtone didnt wrote perfectly.
the problem is ..
I have yestaray switched my mixer TTM57 SL and from him got smoke from the crossfader.I switched off and tuned ON again ...Everything was playing ok ,but crossfader didint worked (didnt cut the sound), then after some time i switched on the mixer again then the fader began get smoked and after switching ON again music played but fader did not worked....
before all this i have put Deoxit under the buttons B1 and B6 as was said on your web and put some Deox It on the rails ....but all was working..And only today there got smoke from mixer and i dont understand what happened..HELP PLEASE
Armtone didnt wrote perfectly.
the problem is ..
I have yestaray switched my mixer TTM57 SL and from him got smoke from the crossfader.I switched off and tuned ON again ...Everything was playing ok ,but crossfader didint worked (didnt cut the sound), then after some time i switched on the mixer again then the fader began get smoked and after switching ON again music played but fader did not worked....
before all this i have put Deoxit under the buttons B1 and B6 as was said on your web and put some Deox It on the rails ....but all was working..And only today there got smoke from mixer and i dont understand what happened..HELP PLEASE
dj SHOK-1
5:59 AM - 20 July, 2009
yeah ,the fader and the crossfader were smoking and now they dont work , dont cut the sound
skinnyguy
8:37 AM - 20 July, 2009
ah...the magic smoke that makes electronics work has escaped or leaked out. if you ever see the magic smoke, your electronics device stops working. you need to either replace the part or have a technician re-inject the magic smoke for things to be back to normal.
dj SHOK-1
11:14 AM - 20 July, 2009
Skinnyguy you are stupid ???
what magic smoke ??? your head is ok???
Im asking what do ??? where to get new parts ??? mixer still got warranty
what magic smoke ??? your head is ok???
Im asking what do ??? where to get new parts ??? mixer still got warranty
dj shadow from detroit
4:49 PM - 20 July, 2009
did you do it correctly?
if so they will get back soon.
if so they will get back soon.
dj SHOK-1
4:51 PM - 20 July, 2009
okei i did it again ...i will be wating the answer...
its mistical that the crossfader has been broken !!!
its mistical that the crossfader has been broken !!!
O.B.1
11:47 PM - 20 July, 2009
I had this happen once on a fostex digital multitrack recorder. Somehow a dime had fallen down into the slit along one of the vertical faders. When the volume of that fader got turned up, I saw a puff smoke appear. The dime was shorting out the fader by acting as a conductor, bridging the electrical contacts along the rails. -maybe check if some metal debris made it's way into your fader?
Lord Fader
9:07 AM - 21 July, 2009
wtf...skinnyguy tried to help you and entertained us at the same time. Contact Rane, get a repair code and send the unit in for service. New 57 faders need calibration when build into the mixer. BTW get some sense for irony....
Shaun W
4:11 PM - 22 July, 2009
I'm not sure if you received a reply to your email.
We'll be glad to service your mixer here at the factory. To send the unit in for repair you will need to be issued an RA# (return authorization number). To request an RA, please e-mail me your serial number, full name, shipping address and telephone number.
Once we receive the unit, our turnaround time is typically 2-3 days.
If you have any questions, please feel free to ask.
Rane contact -->> rane.com
We'll be glad to service your mixer here at the factory. To send the unit in for repair you will need to be issued an RA# (return authorization number). To request an RA, please e-mail me your serial number, full name, shipping address and telephone number.
Once we receive the unit, our turnaround time is typically 2-3 days.
If you have any questions, please feel free to ask.
Rane contact -->> rane.com
dj SHOK-1
9:02 AM - 23 July, 2009
it s ok...i will send the mixer and soon be again on the wheels of steel=))) thanks everybody=)))
DJ Stuart (AR)
6:10 PM - 24 July, 2009
its mistical that the crossfader has been broken !!!
Mistical!
Quote:
okei i did it again ...i will be wating the answer...its mistical that the crossfader has been broken !!!
Mistical!
O.B.1
10:01 PM - 24 July, 2009
give him a break, he is from russia according to his profile...
(or else he typing in fake broken english like "soon-to-be-ex-FS-user")
(or else he typing in fake broken english like "soon-to-be-ex-FS-user")
eder
10:45 AM - 28 July, 2009
They're prolly still on their smoke break. Give them another 10 min to finish up their cigs and they should be good to go. Unless they're hookahing, in which case you could be out for a couple of hours.
Quote:
yeah ,the fader and the crossfader were smoking and now they dont work , dont cut the soundThey're prolly still on their smoke break. Give them another 10 min to finish up their cigs and they should be good to go. Unless they're hookahing, in which case you could be out for a couple of hours.
DJ FlowJay
7:59 PM - 3 August, 2009
same here
but just the crossfader,
willsend it to rane germany tomorrow
but just the crossfader,
willsend it to rane germany tomorrow
nik39
12:41 PM - 8 August, 2009
lol
Quote:
ah...the magic smoke that makes electronics work has escaped or leaked out. if you ever see the magic smoke, your electronics device stops working. you need to either replace the part or have a technician re-inject the magic smoke for things to be back to normal.lol
To participate in this forum discussion please log in to your Serato account.