In response to the other questions:
1) As mentioned in the manual:
Quote:
The Channel Meters display the level of the Main Mix Bus. The meter display is sourced pre Master level and so does not represent the signal level on the outputs. During normal operation the meters display the level of the left and right channel of the program material.
As the audio is limited before output the actual audio that is output will be at a different level to this reading.
2) The channel meter shows the individual track levels in SPLIT CUE mode. In SPLIT CUE mode, the left meter displays the level of the CUE signal and the right meter displays the level of the program signal.
In terms of the analogue inputs issue, are you talking about the direct input 1/8" connection or are you referring to connecting additional audio sources in the back of the unit and using the THRU function? In this case, since the audio is being routed through the software, when you close ITCH it will cease to function. The direct input function is different. This is explained in the manual here:
www.serato.com
