when i plug in my TTM57 all the functions work right, i move the joysticks and everything works fine. i start the turntable and it shows the movement on the screen, and also when i start the turntable the track starts but no sound comes out of the computer neither in the computer or headphones or speakers, i don't know what seems to be the problem, if its my sound driver or i installed something wrong..

As far as I know, sound will come from the outputs on your TTM57, not through your PC speakers or headphones. Connect the RCA outputs from the back of the TTM57 to an AMP/Powered monitors or stereo receiver to get sound.

Do you have D1 selected as the input source for PGM 1 and D2 selected for the PGM 2 input source?

yeah i have the source set up like that ive even tried other settings on the PGM'S
and sound does come out of the ttm57 when i start it i can hear a little noise from the needles cause when i move the vinyl it makes real quiet noises. but not even the PFL lights go up or or show that sound is coming in so i"m guessing the problem is coming from my computer?

Do you see waveforms scrolling and LEDs jumping around within SSL?

no only the waveforms scroll and i can stop reverse and speed up with the turntables but the LED's dnt jump around...

Within the Vinyl control tab of the SSL setup screen make sure both Vinyl Start Offset knobs are turned to 0 and then retest using ABS mode.

okay its fixed now.
thank you very much i needed it for tonight.

Awesome! Have fun :)