Hi,

When I start Scratch Live my left deck is always -8% in the ABS-mode. My turntables are however on 0%. If I pitch up my turntables it slowly goes torwards 0% again. If i change to INT-mode, the pitch is automatically set to -8%. I can increase it to 0% and everything sounds normal again. When I switch back to ABS everything drops down to -8% again, and same when I go back to int, they it's -8% again.

How do I get rid of this -8% decrease on the left deck?

Tried looking into the setup without any luck, have reinstalled and updated drivers, no luck.

Thanks.

Are you using CD players or actual turntables? Make sure the deck is set to 33 and not 45.

Actual turntables, checked settings for 33/45, they match, tried 45 in scratch live aswell as on the deck, same there.

If you connect the left deck to the Right input on the interface - does the problem follow the TT?

Also are you getting circles in the calibration screen? Or are you using a USB hub or a splitter?

I swapped input interfaces, and the problem disappeared, swapped back and it was gone.

Very strange, because earlier I unplugged the input on the box entirely just to make sure it was no loose contacts and plugged it back, that didn't help, but for some reason while having something spinning and swapping them back and forth it solved itself?

Anyway, thanks a lot for your time and your quick response!

No prob :)