DJing Discussion

Forum
 DJing Discussion
TTM57 Rackmount Kit ?
This area is for discussion about DJing in general. Please remember the community rules when posting and try to be polite and inclusive.

TTM57 Rackmount Kit ?

Lynn Sound Systems 1:32 PM - 28 April, 2008
yo, Can anybody tell me if there is a 19" rackmout kit available for the 57?
My Coffin is custom built and was made for a 19" mixer cost alot to have it made custom, and im about to pick up a 57 but would be cool if i could find a Rack mount adapter kit. I have the Denon DNX1500s in it now with the rack mount kit from Denon it fits good.
Lynn Sound Systems 7:53 PM - 30 April, 2008
Bump
Culprit 10:23 PM - 1 May, 2008
can you take a picture of your coffin? I dont have my case yet, but i heard success stories of people removing their rackmount rails and the mixer fitting perfectly. You probably only need a socket wrench and 11-12mm socket to do so.
BriChi 2:05 AM - 2 May, 2008
what about something like this

springtree.net
nobspangle 9:29 AM - 4 May, 2008
Quote:
what about something like this

The 57 won't fit in that it's over 13"
Lynn Sound Systems 1:04 PM - 15 May, 2008
Quote:
what about something like this

springtree.net


Thats like the one i have that denon makes for my dnx 1500. If the 57 fit it
That would be the ticket. So I guess the answer is no, Ill have to modify My cofin myself.

Culprit ???? I have a 19" rack mount coffin and the 57 is 13" Why would i remove the rails?
Culprit 2:47 PM - 15 May, 2008
Sorry Lynn, was confused =]
nobspangle 3:45 PM - 15 May, 2008
Just to clarify the 57 is a standard 10" mixer but it needs 13" of height to mount which is the problem with the mount BriChi posted.
Billy18bm 2:57 AM - 24 June, 2008
jus make something should be to hard

u could use 2x4 to frame it and then lay some plywood over top and cover it with vinyl or carpet.....
shiestO! 10:08 PM - 25 June, 2008
Quote:
Just to clarify the 57 is a standard 10" mixer but it needs 13" of height to mount which is the problem with the mount BriChi posted.


thanks. i was confused as i thought it was 10" mixer as well.
shiestO! 10:09 PM - 25 June, 2008
"knew" it was a 10" mixer.
rahul 5:08 AM - 28 June, 2008
hi there
rahul 5:09 AM - 28 June, 2008
where can i find scratch live in my country
Konix 5:13 AM - 28 June, 2008
This is the Rane distributor in India...

Elgin Electronics
1683/2 J.H. Building
Bhagirath Palace
Delhi
Tel: 91-11-23866044
Fax: 91-11-41564387