i changed about some of the settings, i used to be able to set a new cue point if there was not one by pressing the corisponding deck cue button,

but it doesnt do it now

any ideas

"Hot Cues

- There is a new option in the playback tab on the setup screen called enable hot cues. When this setting is enabled, triggering a cue point when a cue point is not set now sets the cue point.

For example: If you have a track that does not have a cue point in slot 1, pressing 1 on the keyboard will set a cue point in slot 1. Once cue point 1 is set, pressing 1 will trigger that cue point. You can still set cue points normally using ctrl + 1 to 0. "

thanks terrible1f1

thats sorted it

cheers

so, i cant use a button on the 57 to set a cue point? i cant seem to figure that from the manual

djSMIRK

If you are not using the Hot Cue option above then you need to press the 'set cue' button and the corresponding 'cue' button on the mixer.

The 'set cue' button I think is in group 2 by default....

but its easier if you enable the Hot Cue option as you then dont need to press 2 buttons down to set a cue point.

thanx. i'll check that out :D