DjBlaze
9:46 AM - 7 April, 2009
It works with external firewire, It however has crashed while using.
It runs way better than the internal and the framerate is significantly higher.
BUT I was battle testing it and got the grayed out screen of doom while doing so,
good thing it was at home. This was after many continuous hours.
To be fair, I was flogging the computer, I had the internet on. I had loaded a ton of different qtz files to mp3s, effects, everything. Stressing it out, but smartly.
Its a shorter than usual crash log. I DON"T get a lot of crashes and have had great success with all the betas so far PLAYING OUT LIVE 3 to 5 hours a night 5 nights a week or more. I was flogging it at home with the camera feed before I use it out. It was also pretty warm in the room, I had SMCfancontrol and temperature monitor running. i STARE at the CPU percentage whenever I change functions, everything. I'm careful.
It crashed while I was doing nothing. Not digging for tracks, not touching anything.
Disk permissions repair coming,
I had just completed one from the OSX install disk BEFORE this session.
I can tell it wants to work but who knows with the QTZ files how stable they are gonna hold be. Seem to work fine thus far but I had a couple that didn't load or anything so they may have caused the hang.
I will flog again later today.
Anyone Serato Folk wanna check out that crash log please do.
Computer is running at high percentages with the camera loaded but within range, occasionally cpu meters max out, but little to no drop in framerate although laptop display will slow up a tad maybe.
MBP 2.4 4 gig ram 256
graphics card info:
Chipset Model: GeForce 8600M GT
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0407
Revision ID: 0x00a1
ROM Revision: 3212
CRASH LOG
Tue Apr 7 05:29:15 2009
panic(cpu 1 caller 0x001A9C68): Kernel trap at 0x001e9fa2, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000015, CR3: 0x0160a000, CR4: 0x00000660
EAX: 0x0bfd5a60, EBX: 0x0ae90410, ECX: 0x00000000, EDX: 0x00000015
CR2: 0x00000015, EBP: 0x5549e9a8, ESI: 0x00000001, EDI: 0x09f7bb00
EFL: 0x00010a92, EIP: 0x001e9fa2, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000002
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x5549e778 : 0x12b4f3 (0x45b13c 0x5549e7ac 0x1335e4 0x0)
0x5549e7c8 : 0x1a9c68 (0x464700 0x1e9fa2 0xe 0x463eb0)
0x5549e8a8 : 0x1a038d (0x5549e8c0 0x778ebac 0x5549e9a8 0x1e9fa2)
0x5549e8b8 : 0x1e9fa2 (0xe 0x48 0x70 0x10)
0x5549e9a8 : 0x39a95e (0x9f7bb00 0x5 0xd8b6924 0x19ef84)
0x5549e9f8 : 0x186f2a (0x9f7bb00 0x5 0x5549ea68 0xae81208)
0x5549ea18 : 0x171f8a (0xae81208 0x5 0x0 0x0)
0x5549ead8 : 0x1864a5 (0x778eba0 0x5549eb48 0xd000 0x0)
0x5549eb68 : 0x3b6676 (0x778eba0 0x5549f268 0xd000 0x0)
0x5549f298 : 0x3b774a (0x56641000 0x1000 0x0 0x134f0)
0x5549f328 : 0x370238 (0x5549f808 0x56641000 0xdd27208 0x0)
0x5549f5a8 : 0x36eb78 (0x5549f808 0x9f7bb00 0x56641000 0x1000)
0x5549f798 : 0x36f8ff (0x77cfe7c 0x0 0x0 0x0)
0x5549ff78 : 0x3df460 (0x77b0cd4 0xd8b6820 0xd8b6864 0x83260c4)
0x5549ffc8 : 0x1a0887 (0xd9f7640 0x0 0x1a30b5 0x6e53c80)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbfffd988
BSD process name corresponding to current thread: launchd
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
System model name: MacBookPro4,1 (Mac-F42C89C8)
Thanks! Lets figure this out, looks VERY promising having a booth camera at your disposal
