Rane MP25 >>> PLEASE

Pioneer DJM T1 please..........

If you make the Native Instruments Z2 compatible, I think I would explode...

+1,000,000,000 Worth a try if it would be compatible but I know probably not going to happen because of licensing with Traktor. But........if they did this I would go crazy..

I would like to request the Pioneer DJM 2000 Nexus Mixer be added to support for the DJ Club KIt. Thank you.

Rane MP2015 please

Denon DN-X1600 please............Plentyt of us out there own these. C'mon serato :)

DJM-750

Pioneer DJM T1

Denon DN-X1700

Djm-750

DJM 750K & Z2

Z2.

Guys, please be realistic - Z2 will never happen due to the licensing...

+1 pm the DJM-750. Lots of people including myself own this mixer. I would buy this in a heartbeat if integrated. Please look into it Serato.

Another one here for the DJM-750. Pleading with Serato to make this happen, this is one the most widely owned Pioneer mixers.

Allen&Heat Xone 4D

DJM 2000

MP2015

Already is added www.allen-heath.com and can be used TODAY via the 1.7.4 beta

LOL Nevermind I get it now HAHA www.allen-heath.com I forgot about this one. Actually gets my mind on the S8. I know it is unlikely but I'd LOVE to see it.

BTW: I added my +1 to the 2015


Rane MP25 - 1
Pioneer DJM-T1 - 2
N.I. Kontrol Z2 - 4
Pioneer DJM-2000 - 2
Rane MP2015 - 3
Denon DN-X1600 - 1
Denon DN-X1700 - 1
Pioneer DJM-750 - 5
Allen & Heath Xone 4d - 1

Pioneer DJM-T1
Pioneer DJM2000
Pioneer DJM2000NXS
Native Instruments Z2
American Audio DV2USB
Reloop IQ2Midi
Rane MP2015

Vestax VCI380

Vestax VCI-380 is already a native controller and is Serato DJ enabled. There would be no need for the club kit. What you may be looking for is the DVS capability which from what I am hearing turned out impossible. Due to the fact Vestax went belly up I am not sure who would even be willing to work on it (developmentally speaking) at this point. GREAT controller I have heard though. I literally almost bought one before they went out of business.

The American Audio DV2USB would be interesting as (just like the N.I. hardware we are asking for) it would be the first American Audio device supported by Serato period. As someone mentioned above this make both N.I. and American Audio gear unlikely candidates but no harm in asking I say.

Nice list of gear :)

Problem with the VCI-380 is that it needs a firmware update. This has to be done by Vestax who is out of business for now.
It was stated they will return but I don't see any firmware update coming. As far as I remember I have never seen any firmware update from them.

The only thing one can hope for is a VCI-380MK2 with DVS support, Full-RGB-Pads, and much better effects control.

+1 for NI Kontrol Z2.

also...

+1 for someone to make firmware for DVS with VCI-380.

I'd even pay $100 for each function with the 380. $100 for DVS and $100 for the Club Kit. It just makes such a great DJ mixer. I used it for years with my Technics and SSL + Mixemergency. It even has RGB pads!

Xone4D

deeddave,

you have an MP25?

i need/want Club Kit for this

The VCI 380 already has RGB Pads? A firmware update (or even coding from Serato) would make the cues pads match the cue colours?

Better control over effects would defo be a bonus, the pad FX are pretty weak!!!

I reckon DVS support will happen and Vestax are close now to bouncing back (the start of the new financial year is nearly upon us).

Vestax is already up and running www.casio.com just not in the sense we would hope. I would love to see them come back as well but even then they will be under new ownership and I don't think picking up support from all Vestax's previous endeavors would be one of their responsibilities. Could go either way though............ just unlikely is all.
I know you like the glass half full approach with Vestax (as I recall how hard it was to convince you they were going out in the first place LOL) but using the same resources and insight used in that thread and things become a lot more clear however unfortunate it may be.

The only official word we DO have is they are not currently in business. www.digitaldjtips.com so no news is bad news in this case as there would be no need to have a press conference stating "By the way people still no buyers".



No I don't I will be purchasing the MP2015 and the Allen & Heath in about a month (as I am having my first child within the next 2 weeks :o so they must wait) .............. unless the deice released by N.I. tomorrow djtechtools.com is even better than I need to decide which two I will get.

Just teasing with this BTW no harm meant :)

That's not the way I understand it. Vestax will remain as Vestax and under the same ownership. Time will tell.



All good man!!! =D

No. They're multi-colored but not RGB. Someone from Serato once stated that the VCI-380 doesn't support enough colors to show colored cue points.

Correct. It was able to reproduce most of the colors but not all.

I'm pretty sure I got them all. I posted the MIDI XML code somewhere on the forum a few years ago including how to mess around with the colors.

It's all moot now though since it was for SSL. Plus, you could only change the colors in the XML so, it's not like you could change a cue point color on screen and then the controller would change to reflect it.

serato.com

This also doesn't mean they're true RGB. (whatever that means)

Just found out about this Serato feature, I would be chuffed if Serato added support for the DJM-750k.

+1 for DJM T1.

reasons:

I have SL3 box but with dim t1 not being supported i have to use 2 usb ports (one for SL box and another T1 to have the midi working)

I like pioneer mixers and i have been using them for years but they don't have the cue points and some other options like the rane mixers do.

On top of them we eliminate running RCA to the mixer from SL box.


I know adding that option would not being a hard thing for the great serato team.

we are willing to buy the expention pack.

+1

Really hoping they add support for the DJM-750. Please Serato make it happen!

Z2 please!!!

Rane MP2015

Hey Serato,

Just incase you are up keeping with the forms and reading this, there are some people like me that knows what they want and will to pay for it and get it.

If you can come up with price, or a way to have those "unsupported" hardware (like djm t1) to unlock my serato, we (I for sure) willing to pay more then just regular license to have it working.

by the way I am an owner of SL3, ddi sz, ddi sx2, and I have bought a stand alone license for serato. and AFTER all that I still like to be able to use my DJM T1 to be my main sound card and midi controller.

NOTE: for the all the guys above that had a question about rane 61, 62 or 64… well i have a good relationship with our store that I buy and rent equipment from. i have taken those mixers and test them agains the dim t1… and they are amazzzzzing hardware, but none of them have layout and midi mappable flexibility as the dim t1. as far as you need everything at hand to mix video, play with sample, effects as well as all the other options you would need to use your serato at full!

hope this stir something up.

thank you,
u.b.

+ 1 for DJM 750!!!

+25 for Rane MP-25

i would love for them to have it for the RANE MP2015

DJM T1
DJM 750
DJM 2000/nxs

ok, +infinity for all Rane and Pioneer Mixers

A&H Xone 23C

Neat little mixer indeed!!

Dave.

You should get that mixer, I mean you have every other mixer

LOL not my style. Other than the Akai AMX I have no use for such a two channel mixer. I need capabilities and/or style. I am into my classic rotaries or the latest and the greatest. The 23C looks cool but does not fit either of those descriptions. The new 43C doesn't even fit the bill www.allen-heath.com In terms of A&H it is the Xone DB4 for me www.allen-heath.com

traktor z2

Native Instruments Z2 would be awesome !

Xone 4D

DJM2000 Nexus.... It seems silly I have a more advanced mixer then 900nxs, but mine isn't supported

Pioneer DJM-T1 - 6 Requests

Pioneer DJM-2000Nexus - 4 Requests

Pioneer DJM-750 - 9 Requests

Pioneer DJM-2000 - 2 Requests

Native Instruments Z2 - 9 Requests

Denon DN-X1600 - 1 Request

Denon DN-X1700 - 2 Requests

Allen & Heath Xone 4D - 3 Requests

Allen & Heath Xone 23C - 1 Request

Reloop IQ2Midi - 1 Request

American Audio DV2USB - 1 Request

Rane MP-2015 - 5 Requests

Rane MP-25 - 1 Request

looks that the native instruments Z2 highly request …. come on serato give it to us!!!!!

Dave

I asked for MP-25 about 25 times so that's 25 requests!!!

LOL Today alone I would believe. If we counted every time you asked for the MP-25 support I think it would be MUCH more than 25. Although I fear if things actually worked this way Serato would cease to exist haha :)

Denon dnx-1700

I don't think support can/will be added for the DJM2000/NXS.

The block diagram (P. 28 of 2000 UM or P. 31 of 2000NXS UM) shows it's possible only by sacrificing a channel.

For example, DVS could be sent in through CH1 preamp -> CH1 ADC -> DSP -> D_OUT -> SRC -> CH1 USB -> USB IC -> Serato (receives Noisemap, returns digital USB audio) -> USB IC -> CH2 USB -> CH2 SRC - DSP

I don't know if there are USB bus limitations where this couldn't simultaneously happen using 4 and 3, but effectively, CHs 1 and 4 could be sacrificed to send the DVS to the DSP and route to Serato through the D_OUT to return the USB audio to 2 and 3. Seems like it would just be a matter of firmware.

If this theory is true, it seems like you have the capabilities of a 2 channel DVS mixer, or a 3 channel mixer with only one channel have timecode control. The other two could run internally off Serato using controllers/CDJs in HID, or any external audio source.

I wonder someone seating there and reading all this stuff and saying… "don't worry, they will stop requesting support sooner then later"

LOL

Well I can tell you they do listen. Check out some of the request thread like the Karaoke, it took a while but they implemented it. It just a matter of if it is possible to work, cost of R&D?, license agreement with Manufacturer. etc.

It might be simple to implement, but you always have regulatory/licensing agreement that might be the hindrance. Just speculating.

traktor z2 yep come on with it

Denon dn-x1600 please.

traktor z2 we need this asap

Well boys and girls!!! I hostly don't think there would be support for dim t1 or the traktor z2 since pioneer just came on with the dim s9!!! Just my 2 cent! am an owner and thinking about switching over. but this is why i think there was no support for the dim t1 cuz no body will pay close to $1800-2100 for dim s9 where you could fun dim t1 or maybe z2 and might just be as good. btw i picked up my dim t1 for about $900 isn i think.

Denon x1700 pretty please.

+1 for x1700 & x1600 :)

+1 for x1700 & x1600 !!

+1 For DJM-2000NXS
I actually would be happy without DVS on this one since CDJs can do HID if only the USB out could be used directly to the mixer... seems like a VERY simple option... like "partial club kit"

Not only does this not sound simple it sounds impossible. USB direct to the mixer? I don't know of any mixers that even have a USB input. Even with Traktor (how this would work IF they were added to club kit list) this is USB to laptop and RCA (phono) to mixer.

Denon dn-x600
Pioneer DJM-T1
NI Z2

Hello Serato team! Hope this is correct area to post this request in (is it? Just saw another area that looked like it may be as well). Please strongly consider Club Kit support for Rane's new MP2014. It has built in dual-USB soundcard just like its big brother MP2015. Thanks! :-)

I don't care for myself but they definitely should consider the Rane MP2014 and Pioneer DJ DJM-900NXS2.

Especially the DJM will be requested by some of those "Icon" artists, right?

Please add the DJM-900 NXS2 :)

DJM-T1
DJM-900 NXS2

Thirded :)

Fourthed.

As a rental company, having to stock both 900 nexus/srt and NXS2 is going to be a nightmare. The NXS2 is a huge upgrade over the previous Pioneers and probably the Allen and Heaths.

+1

The last six requests were all for the DJM-900NXS2 and I am happy to be number seven.

The NXS2 setup will no doubt continue to remain the club/industry standard and it would be in everyone's best interest for these to have as much support as possible. All opinions and criticisms aside the rate of exposure alone is reason enough.

I think we can give up hope on the T1 and Z2 getting support due to the S9.

The Rane MP-2015 already got support and I firmly believe the MP-2014 will as well.

If nothing else I think we need to see some support for Denon mixers but I fear their recent/future success will only lead to more products which is GREAT for fans of Denon but bad for current owners of Denon gear hoping to get support IMO.

Just a thought - Pioneer might not want to license their mixers to what is now a direct competitor (to their own Rekordbox software...).
But who knows & we'll see - I'm curious how Pioneer will play their hardware game throughout the next year once their DVS pack is out.
I only know for myself - if they become too much of a closed eco-system (which it partially already is, due to the internal DB data created by users can't be exported - and it was confirmed on the Pioneer forums that there is no intention to offer an export mechanisms), I will remove it from my arsenal again - as I need flexible tools and do not want to be locked in the corner by software I use.
c.

Rekord Buddy does/will ensure nobody gets locked into any software again no matter what Pioneer intends or attempts to do.

I do however agree there is a chance Pioneer may not want to license out the new hardware to Serato or Traktor but I do feel if this were to happen the amount of backlash (not Serato users, not traktor users, not VDJ users but ALL users combined) would be substantial and potentially enough to damage their sales.............. maybe

The good news is that the user manual includes the usual alternate DJ software info and generic HID guidelines as usual so it is clear Pioneer at least acknowledges there are intentions of using these players with alternate apps. In fact Pioneer even mentiones Traktor and VDJ by name on the support FAQ on what other apps can make use of the DJM-900NXS2. The thing is generally DJ apps do NOT need permission to support any given hardware. Just to certify etc. The tools are there to support these devices I just hope Serato takes advantage of them.

+1 Pioneer DJM900NEXUS2

+1 Pioneer DJM900NXS2

+1 Pioneer DJM 900 Nxs2

+1 Pioneer DJM900NXS2 and +1 Pioneer CDJ2000NXS2 HID mode

F**k it !! +1 Again !!!

Pioneer DJM-900NXS2
Pioneer CDJ-2000NXS2
Rane MP2014

Pioneer DJM-900NXS2
Pioneer DJM-750

+1

Please!!!
Pioneer Djm900nxs2
Pioneer cdj2000nxs2

Please support Rane MP2014 and add native support!

Rane Mp2014 PLEASE!!!!!

I'd say the MP2014 and Pioneer NXS2 setup are by FAR the most requested hardware for club kit support.

I got sick of waiting sold my nxs2's today on eBay

I didn't get my nxs2's with serato in mind primarily (learned my lesson with my nexus mk1's lol) but I would certainly like to have a more streamline setup. As it is now I still have to use the original nexus players when using serato. Thing is it took about a year or so for serato to support the originals and it's only been about half a year so far so this is not really anything new. Wish djtechtools remembered this fact when hypothesizing on serato and traktor being left behind by pioneer!!!

I should have known better I Learned a valuable lesson. I tried rekordbox but the video is still way behind compared to mixemergency and I like serato a lot better than rekordbox. I'm sure rekordbox will get on par with serato in the near future, but it's not quite there yet.

Agreed.

YEA, please add MP2014 support. ASAP

+1 one djm900nx2

+1 DJM-900NXS2

Please go to this Pioneer's forum link and tell what you think. Maybe If we are all together they listen to us...
forums.pioneerdj.com

Should put the link for this page there instead. There is strength in numbers for sure and we have more of them here. Furthermore I am not sure how interested anyone here at Serato is in getting free DVS expansions from Rekordbox.

Not only free dvs expansions from Rekordbox; dvs support, dvs function for our nxs2 mixer. If they unlock It we Will be able to use those channels for Ableton, VDJ, an so many... Understand me now? Sorry about My english and Thanks for your help.

Hey everyone. Just repeating another statement here re the NXS2:

"Hey guys,

We are currently working on implementing support for the DJM900NXS2 now.

It's hard to say when this work will be complete as there is some back-and-forth regarding firmware developments, and is more complex than the implementation for the original NXS, but you can be assured that it is happening.

I understand it's been a while coming for some of you regular users, so we appreciate your patience and taking the time to give us feedback and staying involved with the Serato community."

Cheers,

Thanks James! There's hope! :-)

Thanks!!

DJM T1

Just ordered the MP2014, assuming Serato will support it, at least with the Club Kit. Otherwise I still have my Traktor Scratch license and I'll switch back to it.

Registering my request for adding Serato certification support to MP2014 +1

I am a longtime Rane/Serato customer. I bought the TTM-57SL when it first came out. I was quite disappointed to learn that Serato DJ would no longer support my hardware which only a few years ago was the brand's flagship mixer.

I have considered the MP2014 but I am baffled as to why hardware manufacturers like Rane and Allen&Heath don't secure Serato certification straight from jump. I don't know if it's lack of resources on the manufacturer's side, or the Serato side, but the net effect is bad for the consumer, and ultimately bad for mixer sales.

Buying a mixer is a major purchase especially given today's outrageous prices. When a DJ finds himself/herself having to make that purchase, they have to make it now. They can't wait for Serato certification to maybe possibly come down the road. That's ridiculous. Hence sales for otherwise ideal mixers suffer.

Just wanted to register my complaint. Looks like I'll be buying Allen&Heath. Thanks.

why does rane mp-2014 not work with serato like mp-2015??? i just bought mp-2014 and want to use my serato with it. does this cost more to unlock? already have clubkit.

It does not cost more to unlock. It simply just can not be unlocked as it is not supported by Serato in any way.

Allen & Heath - Xone:PX5

is there an actual reason for not doing the djm 2000 nexus

The djm-2000mk2 & NXS lack The internal audio routing and inputs necessary to offer DVS. It could potentially run without timecode (HID/midi) but this would just lead to more confusion and bitterness.......... I think.

thats wack! its supposed to be better!

serato can you confirm this?

Please tell me how to get Rane MP2014 (not MP2015) working with Serato DJ. Do I just need to purchase Club Kit?

No the mp2014 is not currently supported by serato at all.

Allen & Heath - XONE PX5

This.......so much, THIS!!!

The PX5 is the most fun I've had on a mixer in a loooong while. I would love it to have SeratoDJ support as well.

Shame the Mp2014 is still not supported. It's already a mixer of legend !

I was about to get back to Traktor but so far I'm getting used to Rekordbox and the MP2014 works well on it.

I'd love if Rekordbox had an improved DVS quality though. It sounds quite digital compared to Traktor's top notch DVS.

Yes please support the Rane MP2014 ! I'd like to upgrade to Serato DJ at some point. I'm stuck using SSL til then. Unless I make that jump to Traktor.. Come on guys.

MP2014 would work with SDJ the same way it works with SSL.

I'd like to do away with the slbox and use the internal soundcards of the mixer obviously as well as take advantages of the updated software and its features.

Please support the Rane MP2014 in Club Kit

The Rane MP2014, PLEASE Serato!!!

I understand and can appreciate what you are asking for. I was simply suggesting you are using SSL by choice and are not actually being forced to.

Pioneer DJM-750

Pioneer DJM-750

i thinks its 11 already for Pioneer DJM-750 including mine...:) so pleaseeeeee...

Really wish the Rane MP2014 was supported. I bought it thinking that it was. It makes no sense for the 2015, which is more mixer than I need, to be supported but the 2014 isn't.

It's because, as of yet, InMusic doesn't want to pay for it.

Legacy gear.

lol @ "legacy" on new unit introduced just last year.

the mp2014 being considered “legacy” gear is wack. I’m one of those that also got the 2014 because the 2015 was too much mixer for my use. It should be supported by Serato and inmusic. You know what I did? Stopped using Serato altogether and got some XDJs lol Problem solved.

Support the 2014 and I’ll go back.

Traktor is an alternative for the MP2014 but it would be extra nice for it to be supported by Serato. Seems like a missed opportunity..

The whole Serato supporting the MP2015 bot NOT supporting the MP2014 is simply asinine. Lost track of how many people I know who either ditched Serato all together over this ridiculous fiasco in favor of other DVSs like Rekordbox DJ or Traktor that work just fine with MP2014, and/or sold their MP2014s because of it.

In all fairness the term legacy is not really being to indicate age here but more pre-InMusic. When an entity obtains a property the obligations and support of products/issues existing prior to the sale are not always cut and dry. I certainly do wish this would happen for you guys but keep in mind there have been two OS versions since this device launched and Rane had more issues than anyone with the new Mac OS architecture than anyone and this is before it is even handed over to Serato to even consider implementing the support. In other words it may be the almighty question of the juice being worth the squeeze. While as an owner and user of such hardware this could not be more of an impact the big picture may speak otherwise. In all fairness I do not personally know of a single person who even owns the 2014 other than what I see on forums etc. The same can not be said about the 2015 in which case I know a select few. Not huffing chests just speaking realities ya know? Still feel like "open hardware" would be the fix all here. Allow use on any hardware that supports (via midi & audio interface etc.) while having a set of guidelines for DVS devices. Similar has been done before and it seemingly works.