DJing Discussion
Denon MC 6000
This area is for discussion about DJing in general. Please remember the community rules when posting and try to be polite and inclusive.
Denon MC 6000
DJ Angel Suave Ortiz
3:53 AM - 15 July, 2013
Thank you Serato!! Finally LED Midi support for the MC6000!
2.5 Already installed and working like a charm.
2.5 Already installed and working like a charm.
DJ nometokes
11:45 AM - 15 July, 2013
Hola Angel. Una pregunta a ti te funciĆ³n scratch. De hecho a mi no me funcionan los jog-jeweels. A ti te funcionan? gracias
skinnyguy
7:33 PM - 15 July, 2013
so....does this have proper platter control for internal mode too?
DJ Angel Suave Ortiz
8:42 PM - 15 July, 2013
Unfortunately the midi map provided by Denon does not have jog wheel control not sure why but you can use other midi maps and still have full LED capability. I use the infamous "Fernandez midi" which dj unique hooked me up with on this forum. This midi has jog wheel functions.
raequan
3:24 AM - 16 July, 2013
got the platters working and cue delete. and cue(white flag) with the cue button i just dont like how loop roll is mapped and the controls on VSl. i tried editing the denon map, the map becomes usless. been at it for 8hrs now.
raequan
4:35 AM - 16 July, 2013
the lights work. they go on and off. i like it to some extent. denon mapped the effects pretty good and the sampler...
i just dont like how they setup loop roll and auto loop. the VSL mappings are useless to me
ME for life heheheh.
Quote:
so it's nothing new then...the lights work. they go on and off. i like it to some extent. denon mapped the effects pretty good and the sampler...
i just dont like how they setup loop roll and auto loop. the VSL mappings are useless to me
ME for life heheheh.
DJ POPPA SWING
7:59 PM - 18 July, 2013
Hello out there. can anybody please let me know if there is a mapping to get the lights to work with serato & mc6000 yet. thank you.
DJ Unique
8:06 AM - 23 July, 2013
I just tested the XML posted on link below and it works well in SSL 2.5
serato.com
Platters and lights work.
Sync toggles platter from vinyl to bend mode.
'PARAM 1 & 2" controls auto-loop but no lights
"EFX 4" buttons activate the Censor (reverse)
"EFX Scroll" is for the effects BPM multiplier
No lights on Key Lock button but it's mapped
All other buttons and scrolls work as expected.
I haven't tested samples and can't figure out what the "SHIFT" button does.
serato.com
Platters and lights work.
Sync toggles platter from vinyl to bend mode.
'PARAM 1 & 2" controls auto-loop but no lights
"EFX 4" buttons activate the Censor (reverse)
"EFX Scroll" is for the effects BPM multiplier
No lights on Key Lock button but it's mapped
All other buttons and scrolls work as expected.
I haven't tested samples and can't figure out what the "SHIFT" button does.
VDJ D-RoCk
8:26 AM - 6 August, 2013
Hi there,
how do I set the Denon to make it work in Serato?
Use a Macbook Pro with Serato 2.5
thx
how do I set the Denon to make it work in Serato?
Use a Macbook Pro with Serato 2.5
thx
DJ Unique
8:29 AM - 6 August, 2013
how do I set the Denon to make it work in Serato?
Use a Macbook Pro with Serato 2.5
thx
Email me so I can send you the XML with instructions.
djunique1@hotmail.com
Quote:
Hi there,how do I set the Denon to make it work in Serato?
Use a Macbook Pro with Serato 2.5
thx
Email me so I can send you the XML with instructions.
djunique1@hotmail.com
DJ Omni 715
5:11 PM - 5 September, 2013
Can some one send me the XML with instructions. My email is dbj760@yahoo.com Thank You..
DJ Unique
3:37 AM - 6 September, 2013
I was going to send you the XML, however I just realized that I already did.
Quote:
Can some one send me the XML with instructions. My email is dbj760@yahoo.com Thank You..I was going to send you the XML, however I just realized that I already did.
lucian
8:03 PM - 23 December, 2013
Rookie dj here. I just got into this and i bought the mc-6000 and using VDJ. My friend who is an accomplished DJ laughed at me and told me real DJ's use Serato Scratch Live. I've been doing my research and found out the md-6000 can be mapped with Scratch live. Please anyone HELP I need the mapping for the denon mc-6000. I willbe eternally grateful.
lucian
8:07 PM - 23 December, 2013
Please if u can add instruction. I'm also using a new mac book pro.
DJ Unique
3:40 AM - 24 December, 2013
lucian,
I responded to your private message.
Give me your email address and I'll send you the XML.
Don't forget that you will still need the interface (SL1, SL2, SL3 or SL4) for Serato Scratch Live to work.
Quote:
Rookie dj here. I just got into this and i bought the mc-6000 and using VDJ. My friend who is an accomplished DJ laughed at me and told me real DJ's use Serato Scratch Live. I've been doing my research and found out the md-6000 can be mapped with Scratch live. Please anyone HELP I need the mapping for the denon mc-6000. I willbe eternally grateful.lucian,
I responded to your private message.
Give me your email address and I'll send you the XML.
Don't forget that you will still need the interface (SL1, SL2, SL3 or SL4) for Serato Scratch Live to work.
DJ ThickLove
3:16 AM - 27 December, 2013
I need the mapping for my LEDs to work also. Thanks for any help.
DJ Unique
4:09 AM - 27 December, 2013
What's your email address?
Quote:
I need the mapping for my LEDs to work also. Thanks for any help.What's your email address?
DJ Mafia 619
5:41 AM - 14 January, 2014
I had my platters working with this .xml file 2 years ago.
Worked like a charm.
Load it in your presets and try it out.
Now, Im hacking into the Numark 4trak, I cannot get the pitch slider to work smoothly.
If any body have mapped it correctly please advice
Cheers
Worked like a charm.
Load it in your presets and try it out.
Now, Im hacking into the Numark 4trak, I cannot get the pitch slider to work smoothly.
If any body have mapped it correctly please advice
Cheers
DJ Splerge
2:43 PM - 17 January, 2014
Hey DJ Unique,
You had sent me the XML file last week, I went to add it last night and could find the file paths u described in the instructions (MyDocuments/Music/_Serato_/MIDI ) maybe im looking in the wrong place? I am new to the mac world, Im coming from a pc and VDJ to now using a macbook pro mavericks and serato. Maybe you can give me instructions as to where to find that file path on my macbook or in serato? thanks in adavnce.
You had sent me the XML file last week, I went to add it last night and could find the file paths u described in the instructions (MyDocuments/Music/_Serato_/MIDI ) maybe im looking in the wrong place? I am new to the mac world, Im coming from a pc and VDJ to now using a macbook pro mavericks and serato. Maybe you can give me instructions as to where to find that file path on my macbook or in serato? thanks in adavnce.
DJ Unique
1:41 AM - 19 January, 2014
You had sent me the XML file last week, I went to add it last night and could find the file paths u described in the instructions (MyDocuments/Music/_Serato_/MIDI ) maybe im looking in the wrong place? I am new to the mac world, Im coming from a pc and VDJ to now using a macbook pro mavericks and serato. Maybe you can give me instructions as to where to find that file path on my macbook or in serato? thanks in adavnce.
On your "FINDER" find your "Macintosh HD"
If you don't see it then on top there a drop down for "VIEW" that says "SHOW PATH BAR"
Once you do this you will see your Macintosh HD below.
then click as follows:
Macintosh HD/Users/your user name/Music/_Serato_/MIDI
If there is no MIDI folder then create one.
Good luck
Quote:
Hey DJ Unique,You had sent me the XML file last week, I went to add it last night and could find the file paths u described in the instructions (MyDocuments/Music/_Serato_/MIDI ) maybe im looking in the wrong place? I am new to the mac world, Im coming from a pc and VDJ to now using a macbook pro mavericks and serato. Maybe you can give me instructions as to where to find that file path on my macbook or in serato? thanks in adavnce.
On your "FINDER" find your "Macintosh HD"
If you don't see it then on top there a drop down for "VIEW" that says "SHOW PATH BAR"
Once you do this you will see your Macintosh HD below.
then click as follows:
Macintosh HD/Users/your user name/Music/_Serato_/MIDI
If there is no MIDI folder then create one.
Good luck
DJ Gabo
1:55 PM - 9 January, 2015
DJ Unique, Hi. Can you send me de XML file please ?
djgaborossi@gmail.com
Thanks !
djgaborossi@gmail.com
Thanks !
DJ Simpa
11:32 AM - 25 March, 2015
Hola brot... quien me facilita el xml para usar mi mc 6000 con serato? djsimpa@xtremostereo.com
Gracias!!
Gracias!!
Ricardo Escobar
3:41 PM - 25 May, 2015
Funciona muy bien, no me quedo claro lo de los leds porque en mi controlador no se encienden, aparte tengo una duda: se puede poner tambien el JOG en modo ''bend'' aparte de ''vinyl'' y de ser asi como lo activo/desactivo, Saludos!
To participate in this forum discussion please log in to your Serato account.