Video SL is specifically designed to output to a secondary display connected to your computer. Although there are a range of different graphics card and computer configurations, setting up a display for use with Video SL is relatively straight forward. Across all systems, the following steps will be the same:
- Plug in your display.
- Choose the resolution of your display. The default values are usually the best, however you may like to experiment with different values until
you find a setting that suits your display best. If you are unsure of
what the correct resolution setting should be, check your computer and
display documentation.
- Change your display to extended desktop / dual view mode.
In an attempt to simplify, this article is in two parts, covering three
different popular graphics card and OS configurations. The first part
explains how to set up a display using Mac OSX with an NVIDIA graphics
card. The second part explains how to go about the same process using
Windows, with both NVIDIA and ATI graphics cards.
Click on the link below that is applicable to you.
[ Page Break ]
Setting up a Secondary display on Mac OSX
(Macbook Pro with an NVIDIA graphics card)
All display preferences on Mac OSX are accessed from "Displays" in the hardware area of System Preferences. After connecting your monitor, this window is usually automatically opened.
If not, open System Preferences and choose Displays:
After choosing the appropriate resolution for each of your displays in the Display Tab, set your additional display to the extended desktop/dual view mode:
- Click on the Arrangement tab
- Uncheck Mirror Displays
If you find that the window arrangement is backwards, (Your desktop is displayed on your secondary display) drag and drop the small menu bar onto the top of the other window (indicated above by the red arrow).
Troubleshooting
If your display is not detected:
- Go to Display preferences
- Recheck your monitor
connections and power supply
- Click the Detect Displays button
to detect your monitor
[ Page Break ]
Setting up a Secondary Display on Windows
On Windows, display settings can be changed and configured from the control panel of your video card.
To access the control panel of your video card:
- Right click on your desktop
- Select your graphics card control panel
On the left is an image of what you will see if you have an NVIDIA card, and on the right, is what you will see if you have an ATI card.
Click on the link below for instructions specific to your graphics card:
[ Page Break ]
NVIDIA Graphics Cards
Configuring the Display Mode
To configure the display mode:
- Select "Set up multiple displays" from the left hand menu.
- Select "Configure independently from each other (Dualview)"
- Select the displays you would like to use
- Finally, make sure that you select to use your Laptop display as primary
Changing the Resolution
If you are not happy with the default resolution, you can change the resolution of your displays:
- Select "Change resolution" from the left hand menu
- Select the display that you would like to change the settings for
- Choose the appropriate settings for your selected display. You may like to consult your display documentation for the preferred settings.
Troubleshooting
If your display is not detected by your computer:
- Recheck your monitor
connections and power supply
- Click "My display is not shown on the list"
- Click "Rigorous Display Detection"
For further information on NVIDIA graphics cards, click here to visit the NVIDIA website:
www.nvidia.com
[ Page Break ]
ATI Graphics Cards
The ATI graphics card control panel is slightly different to an NVIDIA control panel, however the concept is exactly the same. We suggest using the "basic" settings menu, and then run the configuration wizard.
- Select Extended Desktop
- Select Next
- Select the appropriate resolutions for each of your displays
- Select Next
- Finally, position the icons in the window to match your real life display arrangement
- Once you are satisfied with your settings, click Finish
For further information on ATI graphics cards, click here to visit the AMD website:
http://ati.amd.com
[ Page Break ]
Setting up Video SL
After installing and authorizing Video SL:
- Go to the plugins tab of the setup menu and make sure the "enable Video SL plugin" box is checked.
- Return to the main screen and click on the video tab to enable the Video SL output window.
- Drag this window across to your secondary display
- Click fullscreen
- Configure your output settings in the Video SL setup menu (See manual for detailed information)
- Start mixing videos!
Click to download the Video SL manual
Click for more Video SL resources
Did you find this useful?
Yes
No
