Rane Mixers General Discussion
Talk about Rane's Mixers for Serato Scratch Live:
the Sixty-Eight, Sixty-Two, Sixty-One, and the TTM 57SL.
If you require official support please create a help request.
is there a way to hook up my cdj2000 x 2, scratch live and ttm57sl?
djkhf
7:18 AM 4 July 2010
I am running the new mac book pro 15".
I can't get the cdjs to control the sratch live.
Do I get the midi control from the cdjs?
Can you tell me step by step to setup?
I can't get the cdjs to control the sratch live.
Do I get the midi control from the cdjs?
Can you tell me step by step to setup?
ninos
9:23 AM 4 July 2010
left cdj into INPUT 1 on the the 57
RIGHT CDJ into INPUT 3 on the 57
select the phono/line switches on the rear of the 57, 1 AND 3 PUSH DOWN TO THE "ON" POSITION.
USB from mixer into the computer
in the SSL setup menu make sure the input level is LINE, NOT PHONO.
put the control CD'S into the cdj's, make sure you are on track 1. NOT TRACK 2.
you should be good from there.
RIGHT CDJ into INPUT 3 on the 57
select the phono/line switches on the rear of the 57, 1 AND 3 PUSH DOWN TO THE "ON" POSITION.
USB from mixer into the computer
in the SSL setup menu make sure the input level is LINE, NOT PHONO.
put the control CD'S into the cdj's, make sure you are on track 1. NOT TRACK 2.
you should be good from there.
djkhf
1:13 PM 4 July 2010
do i have to insert the control cd? i thought the cdj2000 has it build in.
Konix
1:37 PM 4 July 2010
Native support for the CDJ-2000s was just announced and is coming in the next 2.1 version. So yes you won't need to control CDs, you'll just plug the CDJs into your computer via USB and control Scratch Live in Internal mode. However, you'll need 3 USB ports on your computer, one for each CDJ-2000, and one for the TTM-57.
djkhf
4:55 AM 5 July 2010
so, what you are saying is they don't really work together at this point right?
ninos
6:07 AM 5 July 2010
not right now, they will be tho, soon. as for now you have to use the control cds
NORMAN ALDER
5:00 PM 2 September 2011
question when i hook up the cdjs to my ttm57sl i still have to hook the cdj to my laptop via usb or just the ttm54 usb goes to my lap top, inorder not to run time code cds? or just cdjs to mixer and mixer to laptop and no timecode cds? clarify please
Konix
3:34 PM 3 September 2011
If you want to use the CDJs as native controllers (no timecode CDs), then you need to connect all three devices to your computer/USB ports. This obviously means you need three USB ports on your computer. If your computer only has two USB ports then you need a powered USB hub for the CDJs (never plug 57/SL box into USB hub, always strait into port on computer).
English
·
日本語
