Serato Software Feature Suggestions

Forum
 Serato Software Feature Suggestions
TTM57 ASIO Driver - Channel select
What features would you like to see in Serato software?

TTM57 ASIO Driver - Channel select

nik39 4:53 PM - 29 September, 2006
I've installed the 57SL ASIO drivers and there is IMHO something important missing (or I overlooked it). Right now, I cant select the ASIO input source and the sound which is coming from the mixer separately, both are combined :-(

Why is this important? For example, lets say you want to use djdecks with the 57SL. The way you would set it up is as following:
ASIO Input 1 : Phono 1 from your TT1
ASIO Input 2 : Phono 2 from your TT2
ASIO Output 1: Signal from left audio file from djdecks
ASIO Output 2: Signal from right audio file from djdecks.

So far so good... but you cant actually listen to the signal coming from ASIO Output 1/2 to your mixer, because if you change the input source select on your mixer, you're changing the input source for the ASIO Input 1/2 as well :-(

What is missing is the ability to select a source from the ASIO driver itself. It should be possible to select A1/A2 (analog 1, 2) for ASIO 1 and select A3/A4 (analog 3, 4) for ASIO 2. The knobs on the mixer itself (source selection between A1/A2/D1/D2 and A3/A4/D1/D2) should only affect the mixers analog output.

Any opinions on this? Did I miss anything?
Thebasementwonder 2:19 AM - 1 October, 2006
its true

i tried traktor studio 3. it wasnt possible to use ASIO driver as i would the MP4.
Serato, Forum Moderator
Goran 3:25 AM - 12 October, 2006
The way 57SL is at the moment, this is true. I'm not sure whether firmware can change something like this, but at the moment you can either record two stereo channels or play 2 stereo channels. Not both. The USB device can stream 4 (stereo) channels, but the mixer is only 2 channel. If you look at the schema at back of 57SL manual, you'll see that the record unit (via which the ASIO gets input) comes after the all the inputs are funneled through PGM1, PGM2.
nik39 11:19 PM - 13 October, 2006
Quote:
The way 57SL is at the moment, this is true. I'm not sure whether firmware can change something like this, but at the moment you can either record two stereo channels or play 2 stereo channels.

I think there is a misunderstanding. You can record two stereo channels and play 2 stereo channels at the same time, but you will always playback what you are actually recording. Please check my PM about this issue.

Quote:
The USB device can stream 4 (stereo) channels, but the mixer is only 2 channel. If you look at the schema at back of 57SL manual, you'll see that the record unit (via which the ASIO gets input) comes after the all the inputs are funneled through PGM1, PGM2.

Thats fine. But technically it should be possible to actually play back a different signal.
Dj K.Smith 3:44 AM - 29 November, 2006
We need video or some support to use video with the 57...
Seasinz 7:55 AM - 8 December, 2006
Its a huge let down... more and more I realize I should of just saved the cash and got a 56 and torq.
nik39 11:43 AM - 17 June, 2007
Goran, can you please move this thread into the suggestions area?
Serato, Forum Moderator
Goran 10:13 PM - 18 June, 2007
* moved from "Public Beta Feedback" to "Feature Suggestions"
D-Twizzle 3:18 PM - 17 July, 2007
Any update on this? I'd like to use this mixer in another program as well.
Skidmark 4:10 AM - 3 August, 2007
Bump...
nik39 4:44 PM - 10 August, 2007
Quote:
Any update on this? I'd like to use this mixer in another program as well.

Bump