Some of these settings have been mentioned here in the forum and others are my personal preference so I figured making a post about it since people have been asking about proper settings on ttm-57sl effects.


Best Effect Settings For TTM 57SL

DONT FORGET TO SAVE YOUR SETTINGS BY GOING TO SET-UP THAN TO HARDWARE AND CLICK ON "SAVE TO MIXER" EACH TIME YOU CONFIGURE A EFFECT TO THE APPROPRIATE DECK.


Manual High Pass Filter

Deck-1
Frequency-Turn left till white line gets thin
Resonance-3.0
Mix-100%
Operation-Move p1 knob clockwise from left to right

Flanger

Deck-1
Mix-100%
Delay Time-X16 (Turn J1 Knob To X16)
Delay/Depth-0.0/11.6
Feedback-30-40% (Move p2 knob between 30-40% for best settings)
Operation-Make sure you turn j1 knob to X16 after that everything is automatic (no need to move anything)

Manual Low Pass Filter

Deck-1
Mix-100%
Resonance-1.8 (can be moved anywhere from 1.5 to 2.5)
Depth/Freq-Turn p2 knob all the way to the left make sure white line turns thin
Operation-Move p1 knob clockwise from left to right

Automatic Highpass Filter

Deck-2
Frequency-Full
Mix-Full
Resonance-Full
Operation-Turn J1 knob to X16 or whatever beat amount you want the filter to work (X16,X4,X8,X1/2,etc) Filter will work automatically without
moving anything

Echo

Deck-Save/use to whatever decks (1 or 2)
Mix-Any number below 65% (My personal preference is to keep it at 42%)
Feedback-Any number below 65% (My personal preference is to keep it at 48%
Delay-I prefer to keep this at X1 (1 beat delay)
Operation-Move j1 knob to whatever amount of beats you want it to delay (x16,X4,X8,1/2,etc)

Hold Echo

Deck-Save/use to whatever decks (1 or 2)
Mix-Any number below 50% (My personal preference is to keep it at 48%)
Feedback-Any number below 74% (My personal preference is to keep it at 61%)
Delay-I prefer to keep this at X1 (1 beat delay)
Operation-Move j1 knob to whatever amount of beats you want it to delay (x16,X4,X8,1/2,etc)