Serato DJ Pro General Discussion

Talk about Serato DJ Pro, expansion packs and supported hardware

Just bought DVS but i hear nothing

Piratetron 1:55 AM - 30 May, 2015
I just bought the DVS expansion pack for my turntables and Akai AMX mixer, but i dont hear anything except a high pitched noise from the control vinyl. i enabled the DVS pack but i still can hear anything. my Turntables are connected Deck1 to input 1 and Deck 2 into Input 2 and im running an RCA from the output of the AMX to my studio monitors. what am i doing wrong?
Tommy Deem 9:39 AM - 30 May, 2015
Switch to dvs from amx, then choose relative, absolute. Basics -> Look manual
&Midge 8:05 AM - 31 May, 2015
Sounds like you sending the turntables in through the Phono channels, Switch them to line inputs.
Tommy Deem 2:22 PM - 1 June, 2015
turntables use phono usually xD
DJ Art Pumpin Payne 4:54 PM - 1 June, 2015
First try playing on Internal to see if you have sound via the SDJ App

I had a similar situation last weekend - I hooked and unhooked my set up 3 times and finally it worked right.

- Try plugging and unplugging the USB - start with AMX plugged in launch SDJ

- start with AMX unplugged, plug in AFTER the software has completely loaded (offline player)

- can't remember which one was the one that caused it to work correctly - I was switching live with another DJ and scrambling to just make it work

Let us know what worked.
Piratetron 4:08 AM - 16 June, 2015
Tommy DEEM had the right answer.